Security or Safety

Security or safety? It’s like the chicken or the egg, which came first?

When I was a new in this industry, as a fire inspector, the use of keyed locks or dead bolts were common. It took time and hard work to educate business and property owners about the value of a safe means of egress. We can all list tragedies where inadequate non-compliant means of egress was the cause.

Now we face numerous new security issues from international terrorism to industrial espionage and/or employee dishonesty. No individual involved with these issues should have access to buildings. The question is, which scenario should take precedence over the other? In today’s technologically advanced world, they are all equally important. I don’t think one should take precedence. Safety and security can be achieved with thought and in some cases new technology.

When starting a project the first thing to do is list safety and security measures to accomplish.

Let’s deal with a hypothetical issue. A building owner wants to limit access through rear exit doors. A guard station used to check credentials to allow entry protects the main entrance. The rear exits are locked from the outside, so there can be no entry through the rear doors and the code has no specific requirements for rear exits to be locked from the outside, assuming the rear doors are not required for handicapped or fire department access.

Next the building owner wants to limit egress through rear doors. The code specifically indicates all egress doors shall open from the inside without a key. There is a section for delayed egress locks. In certain groups, this allows the use of specialized hardware. This specialized hardware enables the egress doors to be locked but still allows for egress. The doors unlock if an alarm is activated or power fails. If an occupant attempts to open the door when no alarm is activated, the door will automatically open after a certain period (15 to 30 seconds).

There is no code requirement, which would not allow a security alarm to activate when a door is opened or attempted to be opened from the inside.

The area would also require signage and emergency lights.
In this situation, we have complied with both safety and security objectives. So when considering which comes first, the chicken or egg, we only have to worry about: scrambled or fried.

Do It Yourself Garage Door Repair

Repairing your garage door can be dangerous. If you read through this article and have any doubts about your garage door repair safety, contact a professional service. It may save you money to do it yourself and you may enjoy learning a new skill. However, the hospital bills due to injuries sustained in the attempt won’t be worth those savings. Above all, educate yourself thoroughly before attempting any

A garage door is one of the most vital components of your home in many ways. Not only does it provide one of the most visible components of your property, being one of the forward-facing aspects of your house, but it also serves as an entryway into your household and a means to express the individuality of your property. As such, the garage door should be treated as importantly as your front door or lawn, and maintained similarly. Given the fact that the garage door is also the most prominent entryway into your home, a lot of care should also be taken to ensure that it functions properly and both lets people into your home as well as keeping unwanted intruders out.

Every installation has a couple of universal methods to keep it in good working order. Garage doors have hinges and rollers which require lubrication every so often to keep movement smooth between the parts, and this lubricant can be purchased from your local hardware stores at inexpensive prices. Additionally, basic preventative maintenance would involve checking the bolts and screws to ensure they are tight and that the balance of the door is not off. An improperly-balanced door will cause stress on the parts and necessitate repair that much faster. These steps do require a bit of knowledge, though, so be sure to call a professional garage door repair technician if you’re not completely sure of what to do.

Another point to keep in mind is if your door is made out of good, keeping it properly painted and waterproofed is important as well. Over time, sunlight and rain will cause cracks and damage to the wood which will result not only in an unsightly appearance but reduce the structural integrity of the door, making it possible for it to get damaged or even for people to break in. This isn’t as applicable with metal doors, but depending on the moisture and humidity in your region, rust can be a possible issue to keep on top of.

The main failing point of a installation, however, are the springs. Springs are high-tension and have a limited lifespan by design, and as such require replacement when they are on their last legs. Typical garage door springs last 10,000 cycles while extended lifespan springs can go up to 100,000. Of course, the specific lifespan depends on a number of factors, such as how often you use the door, how long the spring’s been around before you moved in, and so on. If you know a spring is nearing the end of its lifespan, it may be best to replace it to avoid the risk of being locked in your home.

Unlike lubricating the tracks and rollers, spring inspection and replacement is fairly dangerous for the inexperienced or untrained consumer. Springs are tightly wound up and are under a considerable amount of pressure, making them dangerous to work with without proper equipment or training as they can cause physical injury if not handled correctly. Unless you are properly educated in garage door spring maintenance, it’s best to consult with your local repair technician instead to handle all tune-ups and maintenance work.

So what happens when maintenance is not performed? To start, your door probably won’t open if a critical component, such as the springs or the opener, malfunction or break. Depending on your household’s vehicle arrangement, this can leave you stranded inside your home and unable to drive anywhere you need to. In more severe situations, the track or roller may end up bending or breaking, potentially causing damage to whatever is underneath them or causing structural damage to the garage. These sort of situations can get expensive to repair quickly, even if addressed early on.

Hiring a garage door technician to perform regular maintenance on your installation is the best way to prevent a lot of the common mishaps that lead to huge inconveniences such as this. Most garage doors only need to be serviced once every 6-12 months, so a small bit of time and money spent can go a long way to preventing potentially crippling damage to your home.
do-it-yourself project to be sure you can complete it safely.

What Type of Door are You Dealing With?
Some garage doors swing up in one piece. Some of them ease across the track in sections. Yours could operate with an electric garage door opener or it could be manual. Consider these factors at the beginning of your project. If your garage door operates with an electric opener, the problem could lay there instead of in the door itself. If you’re having a problem with the door running smoothly on the track and it uses panels, there could be an issue with one of the panels instead of the track. Study your garage door. Be completely aware of how it works. Do your best to determine the problem before you begin because it could be something simple.

Check for Loose Bolts and Screws
There are mounting brackets and hinges that hold the track to the wall and guide the door along the track. These have bolts and screws that secure everything in place. A loose bolt or screw most likely won’t be obvious, so you’ll have to go through them all to be sure that they are tight. While doing this, it’s also a good idea to give the mounting brackets a good cleaning. If you screw them into dirt, that dirt can lodge itself in between the screws and the brackets and loosen them again.

The Track: A Main Part of Garage Door Repair
The track is the part that guides the door up along the ceiling. The track could have accumulated or hardened grease inside of it that makes the door feel rough as it comes up. It could also be misaligned, which could cause the door to stop midway on its path. Inspect the entire track for grease buildup and clean it as you go. After it is clean, check the track with a level to ensure that no areas are misaligned.

Inspect the Door
You know that the track is running properly and that all of the hardware is well in place but the door is still not working correctly. If this is the case, your garage door repair problem is likely with the door itself. Inspect the panels, the windows, and all of the edging on the door. The edge is the part that runs along the track, but if there are breaks in the panels that can cause issues as well. If you have wooden doors, the cracks or breaks could probably be fixed with good wood glue. With other materials, you may have to replace the door or one of the panels.